Fixed Assets

Most filters remove dirt particles, but no water (unless it bit). The fact that the boost pump water forms an emulsion with the fuel and in this way passes through the filter. If the fuel filter has detected traces of water, she probably already got into the injection system. Bausch & Lomb shines more light on the discussion. Should immediately flush the entire system with fresh fuel quality fuel. Get rid of the "water" problems can and with special alcohol compounds, but often use them should not be, because they increase the deposition carbon deposits on valves and corroded. Drain the sediment (water) from the tank, replace the fuel filter, Fuel containing no water, then let the engine and let it run for several minutes. Recommended install an additional filter at the outlet of the fuel tank, it will better protect the food system, delaying the dirt and rust.

According to the magazine 'Fixed Assets' 9 / 2002' The secret of longevity: the withdrawal of heavy lifting and transport equipment 'by O. Zharkov Air intake seamless flow of purified air into the diesel – a prerequisite for its functionality. Sucking dust through leaky inlet duct capable greatly reduce the life of the engine: particulate matter will be literally "ripped off" the working surface of the cylinder. Therefore, maintenance should include inspection of all air duct leak. The reason for its violations can become unnerved clamp or a crack in the duct. Check the air filter elements, if necessary, clean or replace them. Check for leaky joints or places in the corrugations.

Zehnder Bank

Breakout can be as aluminum and bimetal radiators, which are characterized by high strength, low thermal inertia and low weight. About what one is more reliable and efficient, conducted endless debates, but in practice the difference between these two types of heaters are not so great. Especially when it comes to their use in the heating of private houses, where there can be significant jumps in temperature or pressure of water, and she is usually fairly well cleaned. Steel radiators are usually tubular or panel. The panel is a sheet of steel, shaped and welded together so that between them formed the channels through which flows the coolant. Such devices heat very well give off heat, but are relatively small (about 10-12 years old) life. For private home heating system best for heat transfer and reliability for today are steel pipe radiators, which are usually seamless pipe without joints or welds, which provide the necessary configuration (Arbonia, Sira, etc.).

In addition, such devices are heating can have the most intricate shape, which opens wide scope for the imagination of the designer of interiors (there are even radiators, "disguised" under the bench – for example, Zehnder Bank). Heating of a private house: fixtures of heating devices other than true heaters, need to select valves for their hand-off or control devices to control their heat. The first option – it is well known to all the ball valve. He has only two positions – "open" and "closed", and for him to switch to human presence.